Pneumatic control valve,Electric control valve,Pneumatic ball valve-Control valve manufacturer

contact us

SHANGHAI HUIXUAN VALVE

Mobile:+86-17717520739
Wechat:17717520739
Email:info@shxvalve.com

Address: NO.720, Suide Road, Jiading District,Shanghai, China.
 

Pneumatic PTFE lined butterfly valve

Model:

  • Port size:2"~24" (DN50~DN600)
  • Pressure:PN10-PN16 CL150
  • Medium:Corrosive medium
  • Temperature :-29~180℃
  • Body material:WCB,CF8,CF8M,CF3,CF3M+PTFE lined
  • Description:China Pneumatic PTFE lined butterfly valve manufacturer,factory and supplier,flange or wafer type Pneumatic full PTFE lined butterfly valve for corrosive medium.
Pneumatic PTFE lined butterfly valve introduction
Pneumatic PTFE lined butterfly valve is full PTFE or PFA lined body and disc for corrosive medium.The connection end can be wafer,lug or flange type..Pneumatic PTFE lined butterfly valve can be easily installed and maintained in any location.The sealing element can be replaced, and the sealing performance is reliable to achieve zero leakage of two-way sealing, the sealing material is resistant to aging, corrosion and long service life.

Pneumatic PTFE lined butterfly valve is not only widely used in petroleum, gas, chemical industry, water treatment and other general industries, but also used in the cooling water system of qianthermal power station.

Pneumatic PTFE lined butterfly valve specification
Body: Cast Iron, Ductile Iron, Aluminum Stainless Steel,CF8,CF8M,CF3M
Disc: Stainless Steel+PTFE, Stainless Steel+PFA, Stainless Steel+F4
Stem: Stainless Steel
Seats: PTFE
Size: 2″ – 24″ (50mm – 600mm)
Flange accommodation: EN 1092 PN 6/PN10/PN16
ASME Class 150
AS 4087 PN 10/ PN 16
JIS 5K/10K
Top flange:ISO5211
Temperature range: -40 °C to + 180 °C (depending on pressure, medium and material)
Body style: wafer,LUG,Flange
 
Pneumatic PTFE lined butterfly valve technical parameter
Optional functions of electric actuator double acting, single acting
Optional models of electric actuator AT series, AW series
Voltage AC110V, AC220V, AC24V,DC24V
Air source pressure 2bar-8bar
Nominal diameter DN25mm ~ DN1200mm
Nominal pressure PN1.0MPa~PN1.6MPa
Applicable temperature PTFE:-30~ +180℃
Connection mode Lug,wafer,flange type
Body material carbon steel, stainless steel+PTFE lined
Valve disc material carbon steel, stainless steel+PTFE lined
Seat lining PTFE
Suitable medium water liquid, gas, slurry, oil,corrosive medium. etc.

inquiry us

INQUIRY US

微信扫一扫

添加我为好友了解更多